Energy & environment

Fluidised Bed Boiler

Energy & Environment
Energy & environment Services Products

Fluidised Bed Boiler

Top Fluidised Bed Boiler and Incinerator operators (including those using Bubbling Fluidised Bed technology) have been putting their trust in Calderys for decades. With an expanding portfolio of project references starting from leading OEMs in the Nordic countries of Europe, Calderys can deliver an optimal Fluidised Bed Boiler refractory lining for you anywhere in the world for any feedstock type.

Fluidised%20Bed%20Boiler_A.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice. See the <a href="https://customernet.calderys.com">Customer Net</a> for all data sheet information.</p> <p><br /> Castable examples:</p> <ol> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ol> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:</p> <ul> <li>Keraplan SiC-V-85-E</li> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Fluidised%20Bed%20Boiler_B.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ul> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:</p> <ul> <li>Keraplan SiC-V-85-E</li> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Fluidised%20Bed%20Boiler_C.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ul> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:</p> <ul> <li>Keraplan SiC-V-85-E</li> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Fluidised%20Bed%20Boiler_D.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ul> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:</p> <ul> <li>Keraplan SiC-V-85-E</li> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Fluidised%20Bed%20Boiler_E.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ul> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:</p> <ul> <li>Keraplan SiC-V-85-E</li> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Fluidised%20Bed%20Boiler_F.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ul> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:</p> <ul> <li>Keraplan SiC-V-85-E</li> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Fluidised%20Bed%20Boiler_G.png<p>For this zone where slag and vapours build up, alkali resistance is a big factor in optimal refractory choice.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW LS 60-85</li> <li>CALDE® SPRAYCAST SiC 70</li> </ul> <p>Gunning example:</p> <ul> <li>CALDE® GUN LM 74 A</li> </ul> <p>Patching option for small areas:</p> <ul> <li>CALDE® STIX PB 85</li> </ul> <p>Smooth surface texture is a key refractory consideration here due to the fall of ash.<br /> Castable examples:</p> <ul> <li>CALDE® CAST / FLOW 50 A</li> <li>CALDE® CAST HYMOR 2800</li> <li>CALDE® SPRAYCAST LM 74 A</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN F 40</li> <li>CALDE® GUN LF 50 A</li> </ul> <p>This is an intense zone for slag, so normally refractories containing SiC are recommended.<br /> Castables:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Ramming option for small areas:</p> <ul> <li>CALDE® PLAST REDD RAM</li> </ul> <p>Patching options for small areas:<br /> Keraplan SiC-V-85-E</p> <ul> <li>CALDE® PATCH PS 70</li> </ul> <p>This is a critical area for abrasion resistance due to the falling of slag, but also thermal shock resistance due to water contact.<br /> Castable options:</p> <ul> <li>CALDE® CAST, FLOW, and SPRAYCAST ranges</li> </ul> <p>Gunning examples:</p> <ul> <li>CALDE® GUN LF 50 A</li> <li>CALDE® GUN LM 74 A</li> <li>CALDE® GUN B 85</li> </ul>

Top Fluidised Bed Boiler and Incinerator operators (including those using Bubbling Fluidised Bed technology) have been putting their trust in Calderys for decades. With an expanding portfolio of project references starting from leading OEMs in the Nordic countries of Europe, Calderys can deliver an optimal Fluidised Bed Boiler refractory lining for you anywhere in the world for any feedstock type.