Aluminum & non-ferrous

Dosing Furnace

Aluminium non-ferrous
Aluminum & non-ferrous Services Products

Dosing Furnace

Dosing furnaces are used to dispense an accurate amount of molten metal into the die casting machine. The process requirements of these furnaces require high quality refractories.

Dosing Furnace A<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution<br />  </li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace B<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace C<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace D<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace E<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace F<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace G<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace H<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace I<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace J<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace K<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Dosing Furnace L<ul> <li>ALKON® CAST MF 40 CFM: semi-insulating but dense solution if heated by electrical elements</li> <li>ALKON® CAST MM 60: upgrade solution if there is a high risk of corundum growth by electrical radiant tubes</li> <li>ALKON® CAST MW 14 C/G: extra insulation solution</li> </ul> <ul> <li>ALKON® CAST 204 and ALKON® CAST LB 85: reference solutions</li> <li>ALKON® CAST HYMOR 80 AL for extra resistance to dross, strong alloys & flux</li> <li>ALKON® CHEM PB 85: solution for extra resistance and quick dry-out combination</li> <li>ALKON® FLOW LB 85: self-flowing solution to cast in one piece in thin walls</li> <li>ALKON® CAST MT 90 for pure aluminium</li> </ul> <p>Precast solution available. </p> <p>Aluminium infiltration barriers.</p> <p>Layers of insulating bricks and boards to minimize thermal loss and to prevent hydrogen pick-up.</p> <p>Shell temperature as low as 50°C can be reached.</p> <ul> <li>ALKON® DRY SF 40: backlayer dry-vibrating mix in walls if precast solution is used</li> </ul>

Calderys is one of the leading provider of refractory solutions for the dosing furnace of your aluminum foundry. Our monolithic refractory range fits perfectly to the complex lining design of these furnaces. Our monolithic refractory range has been developed to fit the complex lining design of these holding furnaces. Our solutions allow excellent metal quality and very low energy consumption. 

In some regions, Calderys can even pick up your old equipment, revamp in our premises and deliver to you hot, ready to receive metal. Contact us to learn more about the solutions available near you.