Aluminum & non-ferrous

Anode Baking Furnace

Aluminium non-ferrous
Aluminum & non-ferrous Services Products

Anode Baking Furnace

Calderys is a worldwide supplier of monolithic refractory for Anode baking furnaces. The main needs we satisfy are precast shaped top blocks with caps on top of flue walls and medium- or light-weight insulating monolithics. Calderys also delivers mortars for flue walls and end-walls, as well as cold repair patching materials. Recommendation for closed pit technology - Roof repairs: Quick repairs of brick-lined roof section with medium weight CALDE® GUN MW STRONG LITE applied manually.

Anode Baking Furnace A<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p>

Anode Baking Furnace B<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul>

Anode Baking Furnace C<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p> <p> </p>

Anode Baking Furnace D<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p> <p> </p>

Anode Baking Furnace E<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p> <p> </p>

Anode Baking Furnace F<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p> <p> </p>

Anode Baking Furnace G<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p>

Anode Baking Furnace H<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p>

Anode Baking Furnace I<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p> <p> </p>

Anode Baking Furnace J<p>Approved top blocks material with AP and Riedhammer technology:</p> <ul> <li>CALDE® CAST BETON N</li> <li>CALDE® CAST F 47 G10 / CALDE® CAST F 46</li> <li>WHYTHEAT C / FIRECRETE SPECIAL</li> </ul> <p>Delivery in precast possible, with monolithic for levelling at site if required.</p> <p> </p> <ul> <li>CALDE® CAST LM 70: burner blocks</li> <li>CALDE® CAST XL 140: light weight burner caps</li> </ul> <p>Wide range of insulating monolithic refractories from medium weight to extra-light, approved by reference ABF technology providers:</p> <ul> <li>CALDE® CAST MW 116</li> <li>CALDE® CAST LW 116 C/G</li> <li>CALDE® CAST XL 106 C/G for insulation in the side walls and adjustments of insulation layer as well as insulating in crossover.</li> </ul> <ul> <li>CALDE® TROWEL SF 40 & SF 47: ceramic bonding mortar for headwall and flue wall bricks.</li> <li>CALDE® TROWEL PF 45: air setting mortar for wedge bricks.</li> <li>CALDE® TROWEL HF 34 U: air setting mortar for crossover bricks.</li> </ul> <ul> <li>CALDE® STIX 14: Fibre-free semi-insulating patching refractory material to seal the head wall and the flue wall expansion joints.</li> </ul> <ul> <li>AC 42 D: dense fireclay brick solution.</li> </ul> <p>Calderys does not supply flue and head wall dense bricks.</p> <p> </p> <p>Quick repairs of crossover section with dense gunning like CALDE® GUN C 28 and combined metallic/ceramic anchors system.</p> <p> </p> <p>Quick repair patch material for flue and head wall repairs: chemical bonded or cement bonded, dry mix or ready to use solutions available.</p> <p> </p>

Anode Baking Furnace K

Anode Baking Furnace L

Anode Baking Furnace M

Anode Baking Furnace N

Calderys is a worldwide supplier of monolithic refractory for Anode baking furnaces. The main needs we satisfy are precast shaped top blocks with caps on top of flue walls and medium- or light-weight insulating monolithics. Calderys also delivers mortars for flue walls and end-walls, as well as cold repair patching materials.

Recommendation for closed pit technology - Roof repairs:

Quick repairs of brick-lined roof section with medium weight CALDE® GUN MW STRONG LITE applied manually.